KeywordKerrisdale Equipment Ltd
http://www.kerrisdaleequipment.comKerrisdale Equipment is a family owned company in business for over 40 years on the west side of Vancouver. We have a friendly, knowledgeable staff dedicated to helping you tackle your project, big or small. We carry many specialty items you won't find everywhere else and we also deliver. Let us assist you today!
Rent tools and equipment like a compactor, chain saw, conveyor, trim saw, multi-tool cutters, planers, crushers, hoists,and thermo cameras in Vancouver, British Columbia.
Currently Looking In:
Categories
Rent from Kerrisdale Equipment Ltd in Vancouver, BC:
1 to 20 of 24 listings availableAir Driven Plate Compactor
Works in confined spaces, no fumes!
Tools you won't find in every tool yard!
- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd
Air Scrubber, HEPA
DefendAir HEPA 500
Air Scrubber/Negative Air Machine
- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd
Bobcat 316 Mini Excavator
316 Compact Excavator
| Engine/Electrical | |
| Engine Model | D722-EB |
| Engine Make | Kubota |
| Horsepower | 9.9 HP |
| Maximum Governed RPM | 2000 RPM |
| Performance | |
| Operating Weight | 1676 lbs |
| Weight Class | 0.76 t |
| Travel Speed - High | 1.2 mph |
| Travel Speed - Low | 1.2 mph |
| Arm Digging Force | 1323 lbf |
| Bucket Digging Force | 1874 lbf |
| Boom Swing - Left | 87 deg |
| Boom Swing - Right | 47 deg |
| Maximum Dig Depth | 61 in |
| Max Dump Height | 79.1 in |
| Maximum Reach at Ground Level | 108.5 in |
| Hydraulic System | |
| Auxiliary Std Flow | 5.4 GPM |
| Dimension | |
| Length | 114.7 in |
| Overall Length in Travel Position | 114.7 in |
| Width | 27.6 in |
| Height | 84.8 in |
| Height with Operator Cab | 84.8 in |
- Price:
- $180.00 / daily
- Listed By:
- Kerrisdale Equipment Ltd
Concrete Floor Grinder / Polisher Werkmaster
WERKMASTER TITAN C-1800
The TITAN devours concrete, VCT glue, mastic, rubber back carpet residue, thinset, epoxy, paint and any other surface material you may encounter. It grinds through spalled concrete and rained out slabs like a hot knife through butter!Virtually eliminates edging as you can grind and edge to within 1/8" of the wall and under counter tops right back to the kick plate! 10 hp 28 amps 1500 to 3500 rpm Disc Speed 380 lbs 5 3/4" Disc Size 18" Footprint Adjustable handle Dual action vacuum ports for dry, dust-free pick-up- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd
Concrete Saw, Husqvarna Cut-N-Break
Plunge cut through walls up to 16" thick! Gas powered saw with dual 9" diamond blades cuts a channel through the wall. Must cut with water but as 95% of the cut can be done from the exterior of the wall it minimizes amount of water seeping through to the inside.
- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd
Conveyors
Transports 20 tons per hour! Electric power, ideal for basement excavation.
Tools you won't find in every tool yard!
- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd
Crain Trim Saw
Trims doors without removing.
Tools you won't find in every tool yard!
- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd
Electric Eel Camera EC-10
The EC-10LCD inspects 3"- 8" dia. lines. This compact unit features a super portable console (23 lbs.) an The EelCam pipeline inspection systems from Electric Eel allow you to quickly inspect and locate a wide variety of pipeline problems. Reduce your cost by knowing exactly where the problem is and before you dig. EelCam systems take the guesswork out of your jobs. EelCam systems are compact and easy to use, and made from the same high quality, durable components you have come to know and expect from Electric Eel. EelCam systems have a wide variety of uses such as in-line inspection of sewer and drain lines, septic tanks, service laterals, chimneys, HVAC ducts and much more. .
- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd
Fein Multi-tool cutter
Vibra-cutter - Ideal for flush outs in small areas.
- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd
Floor Scrubber, 20" Cordless, Mastercraft
A walk behind floor scrubber that also squeegees and vacuums up the wet floor behind itself. Runs on 2 x 12volt batteries, holds a 4 hr charge. Has drain hose for easy draining of dirty water from return reservoir. Includes 110V battery charger.
- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd
Forklift, Electric to 2000 lbs
Control Handle The award-winning X10® handle is designed to allow for a short turning radius with low steering effort. All control buttons can be operated with either hand and accessed with minimum hand and wrist movement. The horn buttons are integrated in the hand grips. An ergonomic forward / reverse thumb wheel allows for precise maneuvering. Depending on conditions and operator experience, maximum travel speed can be regulated via the rabbit / turtle switch. Exclusive automatic Brake Override allows slow-speed travel with the handle near vertical. This feature improves maneuverability in tight areas. |
Power 24-volt electrical system with powered lift and SEM travel control. Battery options up to 192 Ah with integrated solid-state 30 Amp battery charger and retractable power cord. |
- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd
Heater, Radient Diesel VAL 6
| Model | VAl 6 KBE5S |
| HEAT OUTPUT | 32.5kW (111000 BTU) |
| FUEL | #1 Fuel Oil, KEROSENE, Diesel |
| TANK CAPACITY | 35 LITERS or 9 GALLONS |
| POWER SOURCE | 120V/60HZ |
| POWER CONSUMPTION | 80W |
| SAFETY DEVICE | PHOTOCELL FLAME MONITOR |
| OVERLOAD CHECK DEVICE | 3A FUSE |
| TYPE | RADIATED DIRECT FIRED |
| IGNITION SYSTEM | HIGH INTENSITY DISCHARGE |
| FUEL CONSUMPTION | .85 gal/h |
| DRY WEIGHT | 83.8 lbs |
| Model | VAL6 KBL |
| HEAT OUTPUT | 32.5kW (111000 BTU) |
| FUEL | KEROSENE or DIESEL |
| TANK CAPACITY | 15.1 gallons |
| POWER SOURCE | 120V/60HZ |
| POWER CONSUMPTION | 80W |
| SAFETY DEVICE | PHOTOCELL FLAME MONITOR |
| OVERLOAD CHECK DEVICE | 3A FUSE |
| TYPE | RADIATED DIRECT FIRED |
| IGNITION SYSTEM | HIGH INTENSITY DISCHARGE |
| FUEL CONSUMPTION | .85 gal/h |
| DRY WEIGHT | 92.7 lbs. |
- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd
Heater, Radient Val6 Daystar, Diesel
| Model | DAYSTAR |
| HEAT OUTPUT | 51,800 BTU/h |
| FUEL | #1Fuel Oil,KEROSENE Diesel |
| TANK CAPACITY | 2.6 GALLONS |
| POWER SOURCE | 120V/60HZ |
| POWER CONSUMPTION | 105W |
| SAFETY DEVICE | Photocell flame monitor 3A FUSE Overheat prevention system Tip-over switch |
| CONTROL SYSTEM | 5SEC. PREPURGE 330SEC. POSTPURGE |
| FUEL CONSUMPTION | .3 gal/h |
| DRY WEIGHT | 40 lbs. |
- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd
Hepa Vacuums
Our hazardous waste HEPA vacuums are designed for the removal of lead, mold, ceramic dust, aluminum, fiberglass and many other hazardous materials. Designed for use in clean rooms, hospitals, and industrial plants or wherever air and dust pollutants exist. DAF dry model includes 1.5" dry tool kit.
|
- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd
Hilti Core Drill DD-130
DD 130 Diamond Coring System
Features a quick -switch from wet to dry and convenient side-handle water flow adjustment. Wet coring in reinforced concrete for 15/32" to 6" holes to precise coring of anchoring holes 15/32" to 1-5/8".
Versatile, mobile and efficient
Cores quickly and neatly into reinforced concrete, natural stone, masonry and asphalt
Designed for both wet and dry coring without modification
Drill stand base plate designed for vacuum attachment and anchor fastening
Can be set up and operated easily by one individual
Water flow conveniently controlled on the side handle
1800 W motor with plenty of reserve power
For optimum power
3-speed gearing
For optimum coring performance for each diameter and material type
- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd
Hilti DD-EC Hand Held Core Drill
DD EC Diamond Drilling System
At 8,000 rpm, TopSpin technology marks the beginning of a new era in diamond drilling. Hand held wet coring in concrete 3/8 in. to 1-5/16 in. For hand held wet coring with little or no dust and no dirty water. Built in drilling slurry extraction system
Makes unrestricted use possible even in sensitive surroundings
No tools required to change out bits
Quick change bits with bayonet connection
Open ended bits
Fast core removal
Drills smoothly and quietly in materials sensitive to cracking
Ideal for renovation and conversion work
Unique TopSpin technology
Maximizes efficiency
Fast coring bits with tall segmentEnsure long life
Independence from external water supplies
Maximizes mobility
- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd
Hilti Dustless Grinder DG 150 w/ Vacuum (Dustless)
DG 150 Diamond Grinding System
Revolutionary new dust free diamond grinder with vacuum. For dust free grinding in concrete, natural stone and masonryDust Control
Up to 95 dust free
Boomerang Cup Wheels
Super high performance
Brushless Motor
Lasts 30 times longer
- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd
Hilti TE 905 AVR Demolition Hammer
TE 905 AVR Demolition System For concrete, masonry, and stone breaking, chiseling, ground rod driving etc Power
Active Vibration Reduction System maximizes operator comfort.
Powerful 1600W motor for maximum chiseling power
Durability
Durable construction for exceptional tool life
"Active" no-load hammering cut-out so tool doesn't work when idling, increasing tool life
Comfort
Active Vibration Reduction (AVR) reduces vibration by 66 for increased operator comfort
Loss prevention
Equipped with Hilti Theft Protection System
- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd
Makita 12" Hand Power Planer
Great for big timber.
- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd
Makita 12" Thickness Planer
Takes up to 6X12" material.
Tools you won't find in every tool yard!
- Price:
- Contact Rental Company
- Listed By:
- Kerrisdale Equipment Ltd